General Introduction:
|
Product Discription:
Two color options:
LED Panel Light PL1616 White LED Panel Light PL1616 Silver
Features:1.Energy saved up to 50%, High intensity
2.Instant start, no filickering, no humming
3.Driver option: Non dimmable and Triac dimmable
Triac dimmable driver makes panel light varies from 10%-100% brightness synchronized
4.Exquisite die-casting tech. Ultra thin design.
5.Special circuit design, each LED can work separately thus it can avoid the influence that a broken LED causes.
6.Working Temperature: -10degree~ 40degree
7.Applications: widely applied to commercial and residential lighting
Applications:12W LED Panel Light 160x160mm Hotel, Meeting Room, Office, Hospital, School, and places where energy saving and high color rendering index lighting needed.
LED Panel Light PL1616 White LED Panel Light PL1616 Silver
Features:1.Energy saved up to 50%, High intensity
2.Instant start, no filickering, no humming
3.Driver option: Non dimmable and Triac dimmable
Triac dimmable driver makes panel light varies from 10%-100% brightness synchronized
4.Exquisite die-casting tech. Ultra thin design.
5.Special circuit design, each LED can work separately thus it can avoid the influence that a broken LED causes.
6.Working Temperature: -10degree~ 40degree
7.Applications: widely applied to commercial and residential lighting
Applications:12W LED Panel Light 160x160mm Hotel, Meeting Room, Office, Hospital, School, and places where energy saving and high color rendering index lighting needed.
How to install LED lights?
Installation Instructions:1. Drill a suitable mounting on the ceiling according to the light’s cutout.
2. Turn off the power.
3. Connect input end of LED converter to commercial power. Make sure no copperwire exposed
4. Put LED driver at suitable location on ceiling.
5. Connect the driver DC output with the DC input of light fixture.
6. Pinch both springs, then push light into installation hole. Make sure the light is fixed well.
7. Turn on the power supply.
More similar products:
2. Turn off the power.
3. Connect input end of LED converter to commercial power. Make sure no copperwire exposed
4. Put LED driver at suitable location on ceiling.
5. Connect the driver DC output with the DC input of light fixture.
6. Pinch both springs, then push light into installation hole. Make sure the light is fixed well.
7. Turn on the power supply.
More similar products:
No comments:
Post a Comment