If you have procured a led downlight, you must ensure that you use the led downlight in the right way. At cnhidee we always avail you a guide on the safe usage of your led downlights procured from us. Below is a brief on how to safely use led downlights procured from us.
The guidance is phased into:
1.Installation2.Usage & Maintenance.
1.Installation2.Usage & Maintenance.
1.Installation:
All our led downlights are supplied with installation manuals. We always encourage you to read the installation manual prior to commencing the installation works. This will enable you digest and understand the key factors for a successful installation. Please pay attention to the cut-hole sizes and the led driver connection. Always make sure that you only use the supplied led driver otherwise you risk electrical short circuits which may result into heavy fires.
All our led downlights are supplied with installation manuals. We always encourage you to read the installation manual prior to commencing the installation works. This will enable you digest and understand the key factors for a successful installation. Please pay attention to the cut-hole sizes and the led driver connection. Always make sure that you only use the supplied led driver otherwise you risk electrical short circuits which may result into heavy fires.
Before powering the led downlight, ensure that you do one last check to affirm that all connections are secure and in order.
2.Usage & Maintenance.
Following a successful installation of the downlight, it is important to know how to use the LED downlight and how to maintain it in cases of any malfunctioning. When using led downlights, you should always avoid multiple and fast switch on and offs, this pauses a risk to the led driver. You should always make sure that your electrical circuits run with in the voltage rating on the led driver that was supplied, if the voltage is higher than the specified voltage range, this will cause failure of the led driver.
Following a successful installation of the downlight, it is important to know how to use the LED downlight and how to maintain it in cases of any malfunctioning. When using led downlights, you should always avoid multiple and fast switch on and offs, this pauses a risk to the led driver. You should always make sure that your electrical circuits run with in the voltage rating on the led driver that was supplied, if the voltage is higher than the specified voltage range, this will cause failure of the led driver.
When you notice any flickering, or any other malfunctioning of the led downlight, please do not attempt to open the downlight. We advise you to seek the services of a certified electrician, or revert to us with a detailed report of the mode of failure and we shall advise on how to rectify it.
As you are well aware, our LED downlights are rated IP43 hence they should not be used in areas with very high humidity scores.
If you abide by the above safe usage guidelines, you will be in position to use your led downlights for a long time.
For any further data regarding the safe usage of led downlights, please contact us at sales@hideeled.com
Next News: 2013 CNHIDEE Main Product Introduction
No comments:
Post a Comment