How to Determine the Quality of LED Light

How to Determine the Quality of LED Light

How to determine the quality of LED light? We have to check the appearance, material, design, efficient, aging test, please see below details:

Appearance:1. Frame Color - (white and silver), different application use different color;
2. Scratch - shouldn’t have scratch on the frame and diffuser;
3. No flicking;
4. No lighting leak in each side;
5. No bright dot or dark dot when the light is on.

Material:1. Component of the driver: IC (we import from America); electrolytic capacity (we use famous brand Rubycon );
2. LED Chip: Epistar 100% import from Taiwan;
3. LGP and Diffuse: acrylic from Taiwan.

Design:Engineers use most advanced Circuit Program;
LED lights and LED power supply are all designed by our own; as we know, LED Driver is the most import of the LED Lights; our design are approved by CE, ROHS, SAA.

Efficient:1. Lumen: LED Panel Light (side lighting): 70-80lm per watt, LED Down light (back lighting): 80-90lm per watt,
2. Power Factor: Active Power Factor Correction, high PF Value (>0.95) but other many other supplies use passive power factor correction.

Aging test:Many LED Lights suppliers test their lights like this: turn all the lights on, and then put them there for 24hours or less than 24hours, in normal voltage, but it seems not good, for CNHIDEE, we test all the LED Lights by the most advanced test machine, we call it “Automatic Aging Test Line”, to enhance production capacity and to give harsh / tough / very difficult testing environment to lights under testing, make sure quality strong enough before shipping.
Low Voltage: 100-150V, Normal Voltage: 220-230V, High Voltage:265-00V, Fluctuation: lights keep on and off in every 2seconds.

We have list some main points to determine the quality, there are many others, please chose right LED light supplier to win your customers with high quality.

Next News: LED Panel Lights Interior Lighting

CNHidee LED After Sales Support-A Case

This is a case from CNHidee about our after sales support.

We are pleased to learn that the 25 pieces LED panel light finally arrived in Venezuela. However, we were disheartened to learn that 2 pieces had a defect after the installations in your customer’s premises. With all our QC checks done on all products prior to shipment, this is a failure rate that we have not scored before in our rich experience of LED light manufacturer. It comes as a big challenge and is totally unacceptable by our standards, we deeply apologize for any inconveniences that this failure may have caused but we wish to assure you that we shall do our best to rectify it as soon as possible.

If it were not for the delay in deliveries to Venezuela, we would surely send you 2 new led panel light to replace the defected panels, however, in the quest to solve the defect as soon as possible, we humbly request you to follow our attached repair guidance document. This will also aid you in becoming more technical about the led panels as many of our other clients.

If the aforementioned is acceptable, we shall humbly request you to invoice us for any fees that shall be therein incurred during the repair as it is our responsibility to rectify the defects. If you need to hire the services of a professional electrician, please proceed as it will save time in delivering to the final client exactly what they procured.

At the moment we still can’t establish the cause of that particular mode of failure but our engineers assumed heavy crushing from the shipment may have caused the breakage of the solder joining the power strips. This is only a minor failure that should not really be happening as we run vibration and crush tests on all our products before sending them out to our customers.

Because we stand for a lasting brand with high quality products, there is nothing much we can say to wash away the disappointment with all parties involved, however we shall offer all our expertise in making it all right at no extra cost to you.

We target to build great, long lasting and fruitful business relationships with all our customers and thus we always strive to send out nothing but the best LED LIGHTING products.

We thank you for your feedback on this defect and we are going to strive to rule out any future such occurrences with all our lighting products.

Thank you for choosing to partner with us in the industry of delivering efficient energy solutions to the world and we look forward to growing the industry together. 

The Trend of LED Panel Light Price

According to the long-term market survey, Shenzhen Borshce company found more and more people bought LED Panel Light now. With the growing demand, the trend of LED Panel Light price is dropping by the day..

LED Panel Light is a very friendly to the environment and is a very effective energy saving product, these features have attracted many people’s attention. With the technology development, the LED panel light has experienced “stable period”, “development period” , “ peak period”, “tough period”, “mature period” these five process and is now becoming more famous.

CNHidee thinks along with the introduction of industry standards, and enterprise paying more attention to product quality, coupled with the decrease of LED panel light price, there will appear more high-quality LED panel lights on the market. These high quality LED Panel Lights will replace the previous panel lights.

Take 600x600mm LED Panel Light of BORSCHE for example:
1.Model: PL6060CW3014-36W
2.Size: 600*600mm
3.LED: imported from Taiwan
4.Power: 36W
5.Input voltage: AC85-265V
6.Lumen: 2988lm

Product description:
This product is simple but elegant. The frame is aluminum frame. We import the high quality Diffuser and Light Guide Plate from Taiwan, the lighting is very soft and even. Instant start,  with no flickering. The installation of this LED Panel Light can be done in many various ways. You can use the wire to hang the panel light, and the panel light can be also built in the ceiling. We do have lots more series that you may view at our website. www.hideeled.com

How to Make the LED light Longer Lifespan

How to Make the LED light Longer Lifespan

How to Make the LED light Longer Lifespan? LED lights can be found in many products that are used every day.

When we buy something new, except warranty, we care much more about the product’s capacity and stability. One buyer asked about the lifespan of LED lighting, but first we need to discuss what manufacturers mean by "lifespan."

One key factor that everyone looks at closely is the lifespan of each of these LED lighting sets. The different lamps used lead to different life spans, and this is a decisive factor for many people.

Are the "life span" claims by LED light manufacturers proper? In the market, numbers ranging from 50,000 hours to 100,000 hours.

The first thing we need to discuss is what manufacturers mean by "lifespan." This doesn't mean that after a certain amount of use, the led will just stop working. This rating has nothing to do with parts or warranty coverage. Most manufacturers don't even mention lifespan on their Web sites.

Please click our website www.hideeled.com. Our website clearly shows our products lifespan 50,000 hours per item.

Here are some tips to keep in mind for this purpose.
Ensure that the temperature of the room is around 75 degrees Fahrenheit.

Make sure that the lighting conditions in the room are not too bright.

Do not turn the contrast settings of the LED lighting as high as possible.

Do not leave the LED lighting set switched on for days continuously.

Following these tips will not improve the lifespan of these leds unrealistically, but they will make a minor difference. To conclude, LED lighting offer a longer lifespan, but their failure rate is much higher due to the large number of LED lamps that are present inside.

In other words, don't worry about lifespan. you'll be able to replace it for far less money than you paid for it in CNHIDEE.

Provious News: This is the first news!

Next News: LED Panel Light Loose Strip Connection Repair

New Remote Control of LED Panel Light User Guide RGB and PWM Version

New Remote Control of LED Panel Light User Guide RGB and PWM Version

RGB Remote control user guide(RGB LED panel light version)

A. Power on   B. Power off   C. Color Ring   D. Speed +   E. Brightness +   F. Mode +   G. Brightness -

H. Mode -   I. Speed -

PWM Remote Control User Guide(PWM Dimmable LED Panel Light version)

A. Power on  B. Power off   C. Brightness UP(smooth)  D.Brightness Down(Step)  E.Brightness UP(Step)

F. Brightness Down(Smooth) G. Light Channel 1,2,3,4 ON  H. Light Channel 1,2,3,4 OFF

Please ensure that the battery is installed in the remote and the panel installation is done correctly. The remote is by default set to operate the particular panel with which it is supplied.

Provious News: LED Panel Light Loose Strip Connection Repair

Next News: Self Guide Repair For LED Panel Light

Self Guide Repair For LED Panel Light with a Dead Group of Leds

Self Guide Repair For LED Panel Light with a Dead Group of Leds

Self Guide Repair For LED Panel Light with A Dead Group of LEDSLighting Source:SMD LED3014

Defect signs:Dark zones on the LED panel light when powered on

Precautions:
1.Please prepare a 2.5mx2.5m Square working platform and ensure that you clear it of any dust.

2.Cushion the work platform to protect the panels being serviced from any sudden scratches.

3.Have enough light in your service room.

4.Ensure that the works are done by a technical person who has prior knowledge of disassembling and reassembling electrical fittings.

Tools:
1.Pair of pliers. (Pair of pliers. (AA))  ((JJ))
2.Electrical star type screw driver. (B)
3.Electrical insulation tape. (C)
4.Wire stripper. (D)
5.Wire cutter. (E)
6.Cutter (F)
7.Soldering Iron (G)
8.Solder Wire (H)
9.Tweezers (I)
10.Electric Blower (J) (H) 

All the above can be bought in your nearest local electrical hardware shop

Construction of LED panel Light:
1.Aluminum frame.
2.Diffuser.
3.LGP
4.Cushioning ( Foam protection)
5.Aluminium back plate.

Instructions for repair guide. 1

Use a removable marker and mark out the side with the defective group of leds.

Gently sit the panel light on the clean, dust free, cushioned work platform already set out. Front face down.

Using your magnetic head star screw driver, gently remove all the back screws securing the back aluminum plate to the main frame. (A)

With all the back screws removed, gently rotate the aluminum back cover, please do not lift off the aluminum cover

please do not lift off the aluminum cover. ((BB))

At the point where the cable runs into the panel, gently lift the aluminum back plate and slowly unplug the rubber bush that secures the cable to the aluminum back plate. Then sit the aluminum back plate on a clean surface. (C)

Instructions for repair guide.2

With the panel open, you will notice a backing foam material, gently lift this off and rest it on the aluminum back plate. •With your pair of tweezers placed at one corner of the panel, gently lift out the LGP, and at an appropriate height, you may lift it with your hands and rest it on a clean surface. (B,C) A  C Foam backing

Instructions for repair guide. 3
After removing the LGP, proceed and remove the diffuser.

With maximum care, gently give the diffuser a soft push from the front face pushing it back. Please note that you have to start at one corner of the panel and work your way down be gentle otherwise the diffuser will be cracked. (B,C)

Direction of the gentle force to lift off the
diffuser

Instructions for repair guide. 4 Make sure you do not scratch the surface of the diffuser.

After removing the diffuser, rest it on a clean dust free surface. (A,B)

Instructions for repair guide. 5At the side marked previously with the dead leds, carefully separately strip from the frame using the cutter.(A,B,C)

Instructions for repair guide. 6 •After removing the defective faulty led strip, un solder it from the power cable.
(A) •Proceed and remove any residue glue that was left of the aluminum frame after removing the defective strip. (B,C)

Instructions for repair guide. 7
With the new supplied led strip, solder weld the power cable to the end of the strip, ensure that the polarity is right, red cable to the positive terminal and the black cable to the negative terminal. (A)
Ensure that the solder joint is sound and secure, to check this, gently pull on the cables after soldering them to ensure that they are securely welded. (B,C)  Instructions for repair guide. 8 After soldering the cables in the right order, place the led strip back in the same position as the defective strip. (A)
Peel off the back paper from the new led strip such that the glue on the back of the strip can help bond it to the aluminum frame. (B,C) 

 Instructions for repair guide. 9Gently place the diffuser back in place, sit one end of the diffuser on the aluminum frame and then proceed and fix the respective opposite side. (A)
With the diffuser fitted, carefully power the panel to ensure that all the leds are powered and give off light. Proceed and clean the diffuser with a dust roller or, use the electric blower to air/ blow out any dirt on the diffuser. Please ensure that the diffuser is 100% dirt free. (B,C)
Instructions for repair guide. 10Proceed and place the LGP back in position, please take maximum care not to damage the leds on the strips. (A, B)
After fitting the LGP in the right position and placing back the white PC reflector, now carefully run the cables to the side , between the LGP and the aluminum frame. (C)

Instructions for repair guide. 11
Place back the foam backing. (A)
Slide back the cable rubber bush in the same position on the aluminum back plate, then proceed and secure the aluminum back plate to the panel by use of the screws. Ensure that the back plate is tightly fitted to avoid any dust from penetrating into the panel. (B,C)

Instructions for repair.12Power the panel and all should be well now.

 

3W LED Downlight at Factory Price

3W LED Downlight at Factory Price

Imagine going shopping for 3W LED downlight and you receive them at factory price. This is what you will get at CNHIDEE, 3W LED downlight at factory price.

Because we desire to give our customers value for their money, we always run promotional items and what we do is offer the led lighting products at factory price.

Our 3 watt LED downlight at the moment is a hot seller and we have thus put it up on the radar for you to buy it at factory price.

This new 3 watt LED downlight coming at factory price is available in two main models, that is, dimmable and non dimmable. We have a wide range of LED light color temperatures to chose from, 2700K- 6500K. i.e Warm white, Natural white, Pure white, Cool white.

The available models of the 3W led downlight at factory price are made of the highest quality materials. The casing is made of ABS and the heat sink is made of the all new finned aluminum heat sink. This makes the led downlight have a longer lifespan. Because we have used the best led chip on the market, and the best encapsulation company, the 3 watt led downlight at factory price gives off the brightest, smoothest lighting that is just perfect for that new project.

For your next project that calls for 3 watt led downlights, look no where else but cnhidee. We shall sell this special downlight at factory price.

For more details about this 3 watt led downlight at factory price, please contact us at sales@hideeled.com or joseph@hideeled.com.

Provious News: Self Guide Repair For LED Panel Light

Next News: Theory of Color and RGB LED Light

Theory of Color and RGB LED Light

Theory of Color and RGB LED Light

Basically there are three primary colors (red, green and blue). These are mixed together, in different proportions to give off the various color shades. The mixing of colored light is called additive color mixing and in a nutshell. This is the purpose of the RGB LED light Controller. It mixes the three colors to create other colors by dimming on the other 3 main colors. White light is perceived where all three additive primaries overlap to the same volumes. Since the white mixture results from the adding of three color light sources, the white light appears to be the brightest of all. Through changing the intensities of the single light sources, a full range of colors can be obtained.
What CNHIDEE Can Offer:
* 9 Colours for options:
1. Red  2. Yellow  3. Green
4. Light Blue 5. Blue  6. Purple
7. Cool white 8. Pure white 9. Warm white

Next News: Hot Sale and Super Cheap LED Downlight

Hot sale and Super Cheap LED Downlight

Hot sale and Super Cheap LED Downlight

CNHIDEE is one of the top manufactures of LED indoor Light. LED Downlight is one of our main products. Allow me to introduce our hot sale and super cheap LED Downlight here.

We have our own mold for the LED downlights, and we are the manufacturer of this special range of led downlights. We can offer quite competitive prices while we guarantee the good quality. Take one of the best sellers as an example here:

CL5013WW3014-36W (2700K-3200K)
CL5013NW3014-36W (4000K-4500K)
CL5013PW3014-36W (5000K-5500K)
CL5013CW3014-36W (6000K-6500K)
Input Voltage: AC 85V-265V
Power: 36W
PF:>95    RA>85
Lighting Source: SMD LED3014 360pcs
Dimension: 8 inch (￠: 224mm X H: 78.5mm)
CCT: WW / NW / PW / CW optional;
Lumen Flux: 3024 lm
Life Span: >50,000Hours
Warranty: 3 years

From the picture, you can see the LED downlight has bigger aluminum housing than our 4 inch and 6 inch LED downlights to assure it’s heat dissipation, we make it with 3 clips which can help in fixing it to the ceiling tightly and safely. The appearance of the LED downlight is quite elegant. Together we design and produce LED drivers especially for our own LED downlights. This can help to reduce our cost and also give assurance on the quality of our products. Its unique design, elegant outlook, standard size and together with its pretty competitive price makes this LED downlight our Hot sale LED Downlight.

Feel free to contact us for more information at CNHIDEE’s website www.hideeled.com

Basic Characteristics of CNHidee Light Sources

Basic Characteristics of CNHidee Light Sources

Every brand has its signature, that one unique stand out point that makes it different from all the rest. Similarly, CNHIDEE led light sources have a number of basic characteristics and below we share a few of them.

100% imported leds: All our led lights are manufactured with the best led chip on the market. The led is a 100% import from Taiwan. The chip is manufactured by Epistar and the encapsulation is done by Harvetek. Both these companies are in Taiwan and they are listed as the best in that trade. This quality makes our led lights stand out from the rest.

Special led driver: A very unique characteristic of our led lights is the Driver. Unlike lots of other led light manufacturers, CNHIDEE has a team of special engineers with many years experience in the design of led drivers. With this team, we are able to design and manufacture the best matching led drivers for our led lights, we thus have more stable lights with a longer life span.

Special packaging: We pay lots attention at how we present our led lights. Compared to the rest of the manufacturers, we have a special colored neutral box packing that comes with a special handle for ease of carrying. In this colored box, we have a special gas bag that protects the led panel lights from getting damaged. You will not find such quality packing anywhere else apart from CNHIDEE.

Sleek Designs: With our experienced team of engineers, we are able to design and manufacture the most aesthetic led lights.

3 years warranty: Because of the quality that we work with, all our led lights come with a 3 year warranty that covers repair, replacement or refund in any event of failure.

For more details on the special characteristics of our led lights, please contact us at sales@hideeled.com or joseph@hideeled.com

How about CnHidee LED Lights?

Every supplier would say that all of the LED Lights in their company are very good, are much better than other suppliers, but as a client, you have to know all the details of the LED Lights, the structure of LED Lights, material used, technical test reports, and compare with more than three suppliers, then you will know which company could be the better or the best LED Lights supplier. Now, how about cnhidee led lights?

For CnHidee LED Lights, we are professional in LED Panel light and LED Downlight manufacturing.. And now I share the details of our LED Panel Lights:

Construction of LED panel light:

Aluminum frame + Diffuser plate + LGP + reflector plate + Aluminum back cover.

1.       Aluminum frame, we have white and silver frame for options, the design of the frame is unique, there is a slope from the outside to the diffuser, the purpose is to avoid light leakage.

2.       Diffuser Plate, Light Guide Plate (LGP) and Reflector plate, we use Acrylic material, chemical called PMMA, Commonly known as the "special treatment of organic glass", this kind of material has high transparency, it makes the LED Panel Lights give off more brightness and with a more even distribution of light.

3.       Aluminum back cover, our design of the back cover is very tight with the frame to avoid any dust from getting into the LED Panels.

Below please kindly find detailed pictures of our LED Panel Light for your reference: