As LED lighting is an economic and energy-saving light source, LED Lights have become more and more popular, such as the LED panel light, LED downlight and the LED tube light. All of these are being widely used in many building projects. But how do we install them, how do we replace the traditional lamps with led lights. This is one of the most common problems that many customers meet. Now, Amanda from Shenzhen Borsche Electronic Co.,Ltd. will take you through the installation modes and guidelines for replacing the traditional fluorescent tube with the LED Tube.
Comparing the traditional tube with an LED Tube, their shape, size and diameter is the same. They are all sub-divided into the class of: T5, T8 and T10. The standard lengths of the tubes are: 600mm, 900mm, 1200mm, 1500mm, although under special cases we may have 1800mm and 2400mm. In brightness comparison an 18W LED tube gives of light equivalent to 40W traditional tube. That makes an initial energy saving of up to 22watts.
When you want to replace the traditional tubes, you need to do as follows:
1.Before installation, you need to switch off the power.
2.Remove the electronic ballast or starter.
3.Directly add the Input voltage exchange mains to both ends of the LED tube.
1.Before installation, you need to switch off the power.
2.Remove the electronic ballast or starter.
3.Directly add the Input voltage exchange mains to both ends of the LED tube.
See photographic guidance below:
No comments:
Post a Comment