LED Panel Light aging test is the important guarantee of the reliability of all electronic products, including LED products, it’s a very necessary step of production.
Aging test can help improve the efficiency of LED lighting products, enhance the stability in later times of usage. After production, LED lighting products may have dark spots, flicker effects, uneven light and various other defects, these defects can only be spotted through aging tests and be repaired before shipping.
Normally aging test takes 24 hrs. To save production costs some manufacturers skip aging tests hence they sell products at low prices.
Normally aging test takes 24 hrs. To save production costs some manufacturers skip aging tests hence they sell products at low prices.
At CNHidee, we produce high quality LED panel light / downlight /tube light, we are strict with every step in production.
We introduced advanced automatic Aging test Lines to test our LED panel light / downlight /tubes. It not only can provide harsh / tough / very difficult testing environments to test these products and make sure that they are of the best quality and are ready shipping., but it also enhances our production capacity.
This advanced aging system is divided into 5 zones:
*Non-power zone: for loading products & loading off products
*Low voltage zone: operating under 100V – 150V
*Normal voltage zone: operating under 220V – 230V
*High voltage zone: operating 265V – 300V
*Fluctuation zone: lights keep on & off in every second
These 5 zones make a revolution every 4 hours, we set 2 revolutions, so each batch will be tested 8 hours.
*Non-power zone: for loading products & loading off products
*Low voltage zone: operating under 100V – 150V
*Normal voltage zone: operating under 220V – 230V
*High voltage zone: operating 265V – 300V
*Fluctuation zone: lights keep on & off in every second
These 5 zones make a revolution every 4 hours, we set 2 revolutions, so each batch will be tested 8 hours.
In the case of emergency, like "short-circuit" an automatic Emergency-alarm will be triggered to avoid any accidents.
Inspectors will check the aging line every 1 hour to see if any quality issues like "flickering", "off-lighting"...... Those lights that will be removed from the testing line for defects will be repaired and placed back on the aging test until all defects are cleared.
Inspectors will check the aging line every 1 hour to see if any quality issues like "flickering", "off-lighting"...... Those lights that will be removed from the testing line for defects will be repaired and placed back on the aging test until all defects are cleared.
This aging line helps to enhance our production capacity.
We take 2 of popular models as an example;
**Round LED panel light 8 inch:
2160pcs are to be well tested in one day.
** LED panel light 600x600mm:
528pcs are to be well tested in one day.
We take 2 of popular models as an example;
**Round LED panel light 8 inch:
2160pcs are to be well tested in one day.
** LED panel light 600x600mm:
528pcs are to be well tested in one day.
CNHidee does the best aging test to ensure quality before shipping, because quality is vital to us, and it is our promise to customers.
No comments:
Post a Comment